Hand-fed chippers

The manually fed HEIZOHACK- wood chippers can break down all wood waste, such as slats, beams, logs, blocks or branches and trunks with a diameter up to a maximum of 300mm or 400mm.

A steel conveyor belt and a pressure roller with welded tongs ensure a powerful and reliable feeding of the material.

The HEIZOHACK- wood chippers are equipped with a low drag drum chip rotor. Thereby flawless operation is also possible with low drive performance and the fuel consumption is reduced. The drive can take place using a propeller shaft, via an internal combustion engine (HM 6-300 VM) or via an electro-motor (HM 4/6-300 EM, HM 5/6/8-400 EM).

The hydraulic feed units supply is undertaken via it ́s the own on-board hydraulic system. An external oil supply is not necessary.

The size of the wood chips can be influenced by the individually adjustable feed speed and the easily exchanged sieve. The ejection of long pieces is prevented by the sieve.

The counterknife can be used quadrilaterally. The quick exchangeable blades can be re-sharpened when fitted.  The feed table and the ejector spout are foldable and supported by pneumatic shock dampers.

Upon request, the ejector spout rotation and the ejector flap adjustment are possible by remote control. The feed speed is adjustable via a flow divider and the direction of the feed elements reversible by the feed safety lever.

The electric controls of the chipping machine have, besides an operator-friendly, load-dependent feed control of the wood feed, also two day counters and an overall operations counter.

The machine is designed solely for manual feeding and is equipped with a feed safety rope.

 

X
CAPTCHA
Are you human?
1 + 0 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.